- Spray cooled drums, where the coolant is sprayed onto the inner surface of the drum
- Water or other coolant filled drums
- Flaker drums with the Simon Annulus Cooling System.
In the Simon Annulus Cooling System, the flaker drum consists of two cylinders,
the inner and outer cylinders being separated by a spiral rib or ribs creating an
enclosed channel through which the coolant flows. This type of construction gives
higher heat transfer rates than either spray or water filled drums and operating
problems, caused by dirty or blocked spray nozzles or poor circulation of coolant
due to fouling of syphon pipes, do not occur.
All Simon flaking drums are designed and manufactured to the relevant BS or ASME code,
machined to close tolerances and ground to a surface finish of 1 micrometre or better.
Optional Equipment - Materials Processed
Details of -
Drum Dryers -
Tubular Dryers & Coolers -
Rotary Dryers & Coolers -
Calciners
If you want to ensure that you don't miss any of the pages on this site,
visit the
Simon Dryers Web Site Index
or Return to our Home Page
R. SIMON (DRYERS) LTD
PRIVATE ROAD NO. 3, COLWICK INDUSTRIAL ESTATE
COLWICK, NOTTINGHAM NG4 2BD ENGLAND
Tel: +44 (0)115 961 6276
Fax: +44 (0)115 961 6351
E-Mail: sales@simon-dryers.co.uk