Over eighty years experience in the design and manufacture of flaking equipment makes the Simon Drum Flaker
the most effective single piece of process equipment for the conversion of materials from the molten or liquid state to easy
to handle solid flakes in a single operation.
This change of state is achieved by applying a film of the material to be flaked to the outer surface of a
horizontal rotating drum which is cooled internally by means of water, brine, glycol or any other suitable coolant. As the
drum rotates, the liquid film solidifies and is subsequently removed from the drum surface by a doctor blade or knife.
The liquid film may be applied to the flaking drum in many different ways, depending upon the physical
properties of the material being processed. Typical feed systems are:
Dip Tray, where the flaking drum is mounted in a tray of molten product
Applicator Roll, where the liquid film is applied to the surface of the flaking drum by means of an
Top Feed, where the molten product is poured into a feed box mounted over the flaking drum.
For materials with super-cooling properties, various modifications to or combinations of these feed systems
may be used.
Top Feed Flaker showing Enclosure with windows Flaking drums can be manufactured in a wide range of
materials including carbon steel, cast iron, chrome/nickel plated cast iron, stainless steel, nickel/chrome alloy steels
and even bronze.
The present generation of Simon Drum Flakers provide an economical, both in terms of running costs and space
requirements, easy to operate and maintain system for flaking a wide range of organic and inorganic chemicals with melting
points ranging from little more than ambient to in excess of 300°C.